top of page
WIRELESS USER STATION WB-2P-LR5
 
Key benefits
  • 802.11a/n/ac (5G Wi-Fi) 
  • MIMO 2x2
  • Power of the transmitter up to 28 dBm 
  • Integrated antenna 12 dBi
  • РoЕ injector 24V
  • Reset button on the injector
 
WB-2P-LR5 - a high-performance wireless user station designed for up-to-date high speed service provision via Wi-Fi technology.  

Wireless connection
WB-2P-LR5 is developed for connection to Wi-Fi access network which might be constructed using base stations within long distances. 

Perfomance
To ensure a stable and uninterrupted operation, the device is equipped with high-performance processors providing high routing rates and ensuring the effective operation of FBWA (Fixed Broadband Wireless Access) technology. 

WIRELESS USER STATION WB-2P-LR5

₹0.00Price
Out of Stock

  •  

    Interfaces

    • 1 Ethernet port 10/100/1000BASE-T (RJ-45)
    • Wi-Fi 5-6 GHz IEEE 802.11a/n/ac
    • Service Wi-Fi 2.4 GHz 802.11b/g/n (short-range interface for adjustment and device setup during the installation period)1

    WLAN

    • Support for IEEE 802.11a/n/ac standards
    • Data aggregation, including A-MPDU (Tx/Rx) and А-MSDU (Rx)
    • WMM-based priorities and packet planning
    • Access points detection
    • Spectrum analyzer 
    • Polling
    • Support for wireless bridges (WDS)
    • Channel list limitation
    • Support for fixed center frequency

    Security

    • Centralized authentication via RADIUS server (WPA/WPA2 Enterprise)
    • WPA/WPA2 encryption
    • 64/128/152-bit WEP encryption

    Network functions

    • VLAN Trunk 
    • Management VLAN
    • General VLAN
    • Transparent Mode
    • MVR
    • Static routing 
    • Time synchronization via NTP
    • Wireless transparent bridge
    • PPPoE client
    • VLAN Mapping
    • Limiting the number of MAC addresses learned

    Configuring

    • Firmware update and configuration via DHCP-autoprovisioning, TR-069
    • Remote management via Telnet, SSH
    • Web interface
    • SNMP (Monitoring)

    Wireless interface parameters

    • Integrated Realtek RTL8812BRH Wi-Fi chip
    • Frequency range 5170 - 5835 MHz
    • Frequency range 5170 - 6160 Mhz (for WB-2P-LR5 rev.B and rev.C)
    • BPSK, QPSK, 16QAM, 64QAM, 256QAM modulations
    • MIMO 2x2 
    • Bandwidth: 5, 10, 20, 40, 80 MHz
    • Channel selection in 5 MHz steps 

    Operating channels2

    • 802.11a/n/ac: 36-165 (5170-5835 MHz)

    Operating channels (for WB-2P-LR5 rev.B and rev.C)2

    • 802.11a/n/ac: 36-230 (5170-6160 MHz) 

    Data rate3

    • 802.11a: up to 54 Mbps 
    • 802.11n: up to 300 Mbps
    • 802.11ac: up to 867 Mbps

    Receiver sensitivity

    • 5-6 GHz: up to -94 dBm

    Maximum power of the transmitter

    • 5-6 GHz: 24 dBm (28 dBm)1

    Antenna parameters

    • Antenna gain: 12 dBi
    • Linear polarization: H/V
    • SWR: 2.0:1
    • Beam width (H): 60°
    • Beam width (V): 15°

    Physical specifications

    • Power consumption up to 8 W
    • Processor –  Realtek RTL8197FS 1 GHz
    • RAM 128 MB
    • Flash 32 MB
    • Power supply: PoE 24 V
    • Operation temperature: from -45°С to +65°С
    • Operation humidity: up to 95%
    • Dimensions (WхHхD): 80x66x282 mm
    • IP54 protection
    • Pole mounting
bottom of page