- Key benefits
- High-performance solution based on Realtek chipset
- Support for 2G/3G/4G-modem and channel redundancy
- Wi-Fi 2.4 GHz 802.11b/g/n with support for MIMO 2x2
- Support for GPS and GLONASS
- Power supply via Passive PoE 24 V and DC 9-36 V
WB-15-W is an all-weather Wi-Fi access point with support for LTE and channel redundancy dedicated to connect network equipment to the Internet or departmental/corporate networks.
The device allows to create GRE tunnels through cellular network, supports router mode, monitoring for quality of connection with a base station and traffic shaping.
WB-15-W is enclosed in case with IP-54 protection level, that allows you to use the device in adverse climatic conditions.
Quick configuration
Due to the settings for large service providers stored in memory WB-15-W automatically detects the profile of the modem.
Connection capabilities
There is an opportunity to set up to 2 nano-SIM cards with support for 2G/3G/4G to the tray located on the front panel of the device. Ethernet 10/100Base-T connector and Wi-Fi 2.4 GHz 802.11b/g/n provide client with access to a local network.
Only operation via external 2G/3G/4G and GPS antennas is provided.
Performance
High-performance Realtek processors are used to ensure stable and uninterrupted operation. Moreover, the Realtek processors provide high rate of data processing.
HotSpot creating
WB-15-W provides operation in «Access point» mode that allows to organize mobile HotSpot in public places with portal user authentication (Captive Portal).
The device is capable to provide connection to SoftWLC service platform in OTT mode through third-party carriers networks. It ensures fast and flexible installing without additional actions.
Power supply
Power to the device might be supplied through clamps (in a car) or through Passive PoE technology.
WIRELESS ACCESS POINT WB-15-W
Interfaces
- 1 port of 10/100Base-T (Ethernet)
- 1 interface of 2G/3G/4G with channel redundancy support
- 2 SMA-type (female) connectors for 2G/3G/4G antennas (Omni, sectoral, panel, etc.)
- 1 SMA-type (female) connectors for external GPS antenna
- Wi-Fi 2.4 GHz IEEE 802.11b/g/n
2G/3G/4G features
- Support for channel redundancy (2 nano-SIM cards)
- Network mode selection
WLAN features
- Support for IEEE 802.11b/g/n
- Data aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx)
- WMM-based priority and planning
- Support for hidden SSID
- Subscriber isolation within one VAP
- 4 virtual access points
- Channel autoselection
- Radio scan
- Spectrum analyzer
Network functions
- Automatic speed negotiation, duplex mode negotiation and MDI/MDI-X switch-over
- Operation in router mode
- Static routing
- DHCP server
- Support for IPsec
- Support for PPP
- Support for GRE over IPsec
- Subscriber traffic transmission out of tunnel
- Support for ACL
- Support for NTP
- Port forwarding
- Support for Syslog
QoS functions
- Packet priorities and planning based on profiles
- Bandwidth restriction for each VAP
- Bandwidth restriction for each client
- Client limitation for each VAP
- Modification of WMM parameters
2G/3G/4G interface parameters
Frequency ranges1- 4G LTE FDD: B1, B3, B5, B7, B8, B20
- 4G LTE TDD: B40
- 3G UMTS: B1, B8
- 2G GSM: 850M, 900M, 1800M, 1900M
Data rates2
- 4G LTE FDD (Cat 4): 150 Mbps (DL) / 50 Mbps (UL)
- 4G LTE TDD (Cat 4): 130 Mbps (DL) / 35 Mbps (UL)
- 3G DC-HSPA+: 42 Mbps (DL) / 5,76 Mbps (UL)
- 2G EDGE: 384 kbps (DL) / 384 kbps (UL)
Maximum power of the transmitter1
- 4G LTE: up to 23 dBm
- 3G UMTS: up to 23 dBm
- 2G GSM: up to 33 dBm
Wi-Fi interface parameters
- Frequency range: 2400-2480 MHz
- CCK, BPSK, QPSK, 16QAM, 64QAM modulations
- Internal omni-directional antenna
- Support for MIMO 2x2
- Embedded Realtek RTL8197FS chip (IEEE 802.11b/g/n)
- Bandwidth: 20, 40 MHz
Operational channels1
- 802.11b/g/n: 1-13 (2402–2482 MHz)
Data rate2
- 802.11b: up to 11 Mbps
- 802.11g: up to 54 Mbps
- 802.11n: up to 300 Mbp
Receiver sensitivity
- 2.4 GHz: up to -90 dBm
Maximum power of the transmitter1
- 2.4GHz: up to 18 dBm
Security
- Centralized authorization via RADIUS server (WPA/WPA2 Enterprise)
- WPA/WPA2 encryption
- Support for Captive Portal
Configuring
- Remote management via Telnet, SSH
- Web interface
- CLI
- NETCONF
Physical specifications
- Maximum power consumption 8 W
- Realtek RTL8197FS processor
- 32 MB Flash
- 128 MB RAM
- Power supply:
- Passive PoE 24 V
- DC 9-36 V
- Operating temperature: from -45°С to +60°С
- IP54 protection level
- Dimensions (WxHxD): 88x232.5x47 mm
- Pole mounted