top of page

Key benefits

  • «Smart Home» management interface
  • High-performance solution based on Broadcom chipset
  • Dual band access point with support for 802.11ax
  • Support for MU-MIMO 2x2
  • PoE+ power supply (IEEE 802.3at)
  • Seamless roaming
  • Up-to-date authentication and encryption means

Solution for enterprises
WEP-3ax-Z is a new Wi-Fi 6 generation access point that will provide maximum bandwidth and stable wireless connection for all connected devices. 802.11ax access points support a broader set of applications that require maximum performance in demanding enterprise environments with low power consumption and low latency.
With high speed, low latency, energy efficiency, increased bandwidth and extended range, the new access points will be able to provide many additional services compared to previous Wi-Fi standards, including Internet of Things (IoT). WEP-3ax-Z is a universal solution for organization of wireless networks in highly crowded areas and high traffic environments (offices, state institutions, conference halls, laboratories, hotels etc.).

the WEP-3ax-Z is an up-to-date flexible solution that allows you to change the network coverage in order to increase the quantity of serviced mobile devices. Due to high-performance hardware platform, scalability features and easy-to-use interface, it is possible to set up IT infrastructure simply and fast.

Wireless connection
Due to support for IEEE 802.11ax standard the WEP-3ax-Z access point provides 574 Mbps (2.4 GHz) + 1201 Mbps (5 GHz) data rates.
The use of MIMO technology and embedded omnidirectional antennas makes WEP-3ax-Z a universal solution for corporate networks construction.

For the corporate environment, modern WPA3 authentication and encryption technologies are supported, which provide personal data protection and environment security. The new generation access points meet the highest security and compatibility requirements for earlier versions of the 802.11 standard.

The high-performance Broadcom processors are used in the devices in order to provide reliability and high data processing rates.

Power supply
The PoE+ technology makes installation of the equipment possible virtually everywhere, regardless of the power supply location. The use of PoE+ technology reduces total cost by discarding power cables and makes installation easier and faster.

«Smart Home» controller
The device contains integrated controller for the «Smart Home» system. The controller provides interaction with sensors and detectors through the wireless Z-Wave channel.


Out of Stock
  • Interfaces

    • 1 port of Ethernet 100/1000/2500 Base-T (RJ-45)
    • Wi-Fi 2.4 GHz IEEE 802.11b/g/n/ax
    • Wi-Fi 5 GHz IEEE 802.11a/n/ac/ax
    • «Smart Home» interface – radio interface for the «Smart Home» system management

    WLAN capabilities

    • Support for IEEE 802.11a/b/g/n/ac/ax
    • Support for roaming IEEE 802.11r/k/v
    • Data aggregation, including A-MPDU (Tx/Rx) and А-MSDU (Rx)
    • WMM-based packet priorities and planning
    • Dynamic frequency selection (DFS)
    • Support for hidden SSID
    • 32 virtual access points
    • Detection of access points from other vendors
    • Spectrum analyzer
    • Channel autoselection

    Network features

    • Automatic speed negotiation, duplex mode negotiation and MDI–MDI-X switch-over
    • Transmission of subscriber traffic outside of tunnels
    • VLAN support
    • 802.1X authentication support
    • NTP support
    • GRE support
    • DHCP client

    QoS functions

    • Bandwidth limiting for each SSID
    • Client data rate limiting for each SSID
    • Support for prioritization by CoS and DSCP


    • Centralized authentication via RADIUS server (WPA Enterprise)
    • WPA/WPA2/WPA3 encryption
    • Support for Captive Portal


    • Remote control via Telnet, SSH
    • CLI
    • Web interface

    Wireless interface parameters

    • Frequency range: 2402 - 2482 MHz, 5170- 5835 MHz
    • DSSS, CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM modulation
    • Built-in Omni-directional antennas
    • Support for MU-MIMO 2x2
    • Support for OFDMA
    • Built-in Wi-Fi Broadcom chipset BCM47622 (2.4 GHz and 5GHz)
    • Bandwidth:
      • 20, 40 MHz for 2.4 GHz;
      • 20, 40, 80 MHz for 5 GHz.

    Operating channels

    • 802.11b/g/n/ax: 1-13 (2402 - 2482 MHz)1
    • 802.11a/n/ac/ax:
      • 36-64 (5170 - 5330 MHz)
      • 100- 144 (5490 - 5730 MHz)
      • 149-165 (5745 - 5835 MHz)1

    Data rate2

    • 2.4 GHz, 802.11ax: up to 574 Mbps
    • 5 GHz, 802.11ax: up to 1201 Mbps

    Receiver sensitivity

    • 2.4 GHz: up to -92 dBm
    • 5 GHz: up to -93 dBm

    Maximum power of the transmitter

    • 2.4 GHz: up to 22.5 dBm1
    • 5 GHz: up to 24 dBm1

    Physical specifications

    • Maximum power consumption — 13 W
    • Broadcom BCM47622 1.5 GHz processor
    • 256 MB NAND Flash
    • 1 GB RAM DDR4
    • Power supply: PoE+ 48V/56V (IEEE 802.3at-2009)
    • Operating temperature from +5 C to +40 C
    • Dimensions (Diameter x Height): 230x56 mm
bottom of page