top of page
WIRELESS ACCESS POINT WEP-2AC
Key benefits
  • High-performance solution based on Broadcom chipset
  • Dual band access point with support for 802.11ac (5G Wi-Fi)
  • Power supply: PoE+ (IEEE 802.3at)
  • Operation in a cluster without a dedicated server (up to 64 devices)
  • Seamless roaming
  • Up-to-date authentication and encryption means
Solution for enterprise
WEP-2ac provides accessible, easy-to-use, high-performance and secure wireless network that combines numerous fea-tures and services required by corporate clients.
WEP-2ac is a universal solution for organization of wireless networks in highly crowded areas and high traffic environ-ments (offices, state institutions, conference halls, laborato-ries, hotels, etc.).

Wireless connection
Due to support for IEEE 802.11n/ac standards, the WEP-2ac access point provides 867 Mbps (at 5 GHz) and 300 Mbps (at 2.4 Ghz) data rates.
The use of MIMO technology and embedded omni-directional antennas makes WEP-2ac a universal solution for corporate networks constriction.

Security
WEP-2ac provides personal data protection and corporate en-vironment security due to the support for modern authenti-cation technologies. Particularly, it uses a dynamic key that is unique for each active client.

Performance
The high-performance Broadcom processors are used in the devices in order to provide reliability and high data processing rates.

Power supply
The PoE+ technology makes installation of the equipment pos-sible virtually everywhere, regardless of the power supply lo-cation. The use of PoE+ technology reduces total cost by dis-carding power cables and makes installation easier and faster.

WIRELESS ACCESS POINT WEP-2AC

₹0.00Price
Out of Stock

  • Interfaces

    • 1 Ethernet port 10/100/1000Base-T (RJ-45)
    • Console (RJ-45)

    WLAN capabilities

    • Support for IEEE 802.11a/b/g/n/ac
    • Data aggregation, including A-MPDU (Tx / Rx) и А-MSDU (Rx)
    • WMM-based packet priorities and planning
    • Dynamic frequency selection (DFS)
    • Support for hidden SSID
    • 32 virtual access points
    • External access points detection
    • APSD
    • WDS

    Network features

    • Automatic speed negotiation, duplex mode negotiation and MDI/MDI-X switch-over
    • VLAN support
    • 802.1X authentication support
    • DHCP client
    • LLDP support
    • ACL support
    • IPv6 support

    Cluster mode operation

    • Cluster creation with the capacity of up to 64 access points
    • Load balancing among access points
    • Automatic synchronization of access points configurations in a cluster
    • Single Management IP – a unified address for access points management in a cluster
    • Automatic frequency channel allocation for multiple access points
    • Authentication via RADIUS server

    QoS functions

    • Packet priorities and planning based on profiles
    • Bandwidth limiting for each SSID
    • Modification of WMM parameters for each radio interface

    Security

    • Centralized authorization via RADIUS server (WPA Enterprise)
    • WPA/WPA2 encryption
    • Support for Captive Portal
    • E-mail notifications on system events

    Wireless interface specifications

    • Frequency range 2400–2480 MHz, 5150–5850 MHZ
    • CCK, BPSK, QPSK, 16QAM, 64QAM, 256QAM modulations
    • Embedded omnidirectional antennas
    • Support for 2х2 MIMO
    • Two embedded Broadcom chips: BCM47452 ( IEEE 802.11a/n/ac) and BCM43217 (IEEE 802.11b/g/n)

    Active channels1

    • 802.11b/g/n: 1-13 (2412 - 2472 MHz)
    • 802.11a/n/ac:
      • 36-64 (5180 - 5320 MHz)
      • 100-144 (5500 - 5720 MHZ)
      • 149-165 (5745 - 5825 MHZ)

    Data transfer rate2

    • 802.11n: 300 Mbps
    • 802.11ac: 867 Mbps

    Receiver sensitivity

    • 2.4 GHz: up to -98 dBm
    • 5 GHz: up to -94 dBm

    Maximum power of the transmitter

    • 2.4 GHz: up to 18 dBm1
    • 5 GHz: up to 21 dBm1

    Physical specifications

    • Power consumption no more than 13 W
    • Processor Broadcom BCM47452
    • 128 MB NAND Flash
    • 256 MB RAM DDR3
    • Power supply: PoE+ 48V/54V (IEEE 802.3at-2009)
    • Operating temperature from +5 Cо to +40 Cо

    Configuration

    • Software update and configuration via DHCP Autoprovisioning
    • Remote management via Telnet, SSH
    • Web interface
    • SNMP
bottom of page