top of page
WIRELESS ACCESS POINT WB-15-W2
Key benefits
  • High-performance solution based on Realtek chipset
  • Support for 2G/3G/4G-modem and channel redundancy
  • Wi-Fi 2.4 GHz 802.11b/g/n with support for MIMO 2x2
  • Wi-Fi traffic monitoring mode in 2.4 GHz
  • Support for GPS and GLONASS
  • Power supply via Passive PoE 24 V and DC 9-36 V
WB-15-W2 is an all-weather Wi-Fi access point with support for LTE and channel redundancy dedicated to connect network equipment to the Internet or departmental/corporate networks.
The device allows to create GRE tunnels through cellular network, supports router mode, monitoring for quality of connection with a base station and traffic shaping.
WB-15-W2 is enclosed in case with IP-54 protection level, that allows you to use the device in adverse climatic conditions.

Quick configuration
Due to the settings for large service providers stored in memory WB-15-W2 automatically detects the profile of the modem.

Connection capabilities
There is an opportunity to set up to 2 nano-SIM cards with support for 2G/3G/4G1 to the tray located on the front panel of the device. Ethernet 10/100Base-T connector and Wi-Fi 2.4 GHz 802.11b/g/n provide client with access to a local network.
Only operation via external 2G/3G/4G and GPS antennas is provided.

Performance
High-performance Realtek processors are used to ensure stable and uninterrupted operation. Moreover, the Realtek processors provide high rate of data processing.

HotSpot creating 
WB-15-W provides operation in «Access point» mode that allows to organize mobile HotSpot in public places with portal user authentication (Captive Portal).
The device is capable to provide connection to SoftWLC service platform in OTT mode through third-party carriers networks. It ensures fast and flexible installing without additional actions.

Wi-Fi traffic monitoring mode
WB-15-W2 allows to capture radio traffic in the 2.4 GHz band regardless of the main Wi-Fi chip. The captured radio traffic can be transmitted in TZSP and HTTP formats to the server for further processing (for example, for MAC collection systems). 

Power supply
Power to the device might be supplied through clamps (in a car) or through Passive PoE technology

WIRELESS ACCESS POINT WB-15-W2

₹0.00Price
Out of Stock

  • Interfaces

    • 1 port of 10/100Base-T (Ethernet)
    • 1 interface of 2G/3G/4G with channel redundancy support
    • 2 SMA-type (female) connectors for 2G/3G/4G antennas (Omni, sectoral, panel, etc.)
    • 1 SMA-type (female) connectors for external GPS antenna
    • Wi-Fi 2.4 GHz IEEE 802.11b/g/n
    • Wi-Fi 2.4 GHz (packet analyzer) based on Realtek RTL8192FR chip

    2G/3G/4G features

    • Large providers profiles detection
    • Support for channel redundancy (2 nano-SIM cards)
    • Network mode selection

    WLAN features

    • Support for IEEE 802.11b/g/n
    • Data aggregation, including A-MPDU (Tx/Rx) and A-MSDU (Rx)
    • WMM-based priority and planning
    • Support for hidden SSID
    • Subscriber isolation within one VAP
    • 4 virtual access points
    • Channel autoselection
    • Radio scan
    • Wi-Fi traffic monitoring mode
    • Spectrum analyzer

    Network functions

    • Automatic speed negotiation, duplex mode negotiation and MDI/MDI-X switch-over
    • Operation in router mode
    • Static routing
    • DHCP server
    • Support for IPsec
    • Support for PPP 
    • Support for GRE over IPsec
    • Transmission of subscriber traffic out of tunnels
    • Support for ACL
    • Support for NTP
    • Port forwarding
    • Support for Syslog

    QoS functions

    • Packet priorities and planning based on profiles
    • Bandwidth restriction for each VAP
    • Bandwidth restriction for each client
    • Client restriction for each VAP
    • Modification of WMM parameters

    2G/3G/4G interface parameters
    Frequency ranges2

    • 4G LTE FDD: B1, B3, B5, B7, B8, B20
    • 4G LTE TDD: B40
    • 3G UMTS: B1, B8
    • 2G GSM: 850M, 900M, 1800M, 1900M

    Data rates2

    • 4G LTE FDD (Cat 4): 150 Mbps (DL) / 50 Mbps (UL)
    • 4G LTE TDD (Cat 4): 130 Mbps (DL) / 35 Mbps (UL)
    • 3G DC-HSPA+: 42 Mbps (DL) / 5,76 Mbps (UL)
    • 2G EDGE: 384 kbps (DL) / 384 kbps (UL)

    Maximum power of the transmitter1

    • 4G LTE: up to 23 dBm
    • 3G UMTS: up to 23 dBm
    • 2G GSM: up to 33 dBm

    Wi-Fi interface parameters

    • Frequency range: 2402-2482 MHZ
    • CCK, BPSK, QPSK, 16QAM, 64QAM modulations
    • Internal omni-directional antenna
    • Support for MIMO 2x2
    • Embedded Realtek RTL8197FS chip (IEEE 802.11b/g/n)
    • Bandwidth: 20, 40 MHZ

    Operational channels1

    • 802.11b/g/n: 1-13 (2402–2482 MHz)

    Data rate2

    • 802.11b: up to 11 Mbps
    • 802.11g: up to 54 Mbps
    • 802.11n: up to 300 Mbps

    Receiver sensitivity

    • 2.4 GHz: up to -90 dBm

    Maximum power of the transmitter1 

    • 2.4GHz: up to 18 dBm

    Security

    • Centralized authorization via RADIUS server (WPA/WPA2 Enterprise)
    • WPA/WPA2 encryption
    • Support for Captive Portal

    Configuring

    • Remote management via Telnet, SSH
    • Web interface
    • CLI
    • NETCONF

    Physical specifications

    • Maximum power consumption 8 W
    • Realtek RTL8197FS processor
    • 32 MB Flash
    • 128 MB RAM
    • Power supply:
      • Passive PoE 24 V
      • DC 9-36 V
    • Operating temperature: from -45°С to +60°С
    • IP54 protection level
    • Dimensions (WxHxD): 88x232.5x47 mm
    • Pole mounted
bottom of page